SKYSHL SS413F Series - Electrode; Dust Check; Manufacture Adjust 1

62
Shenzhen Skyshl Technology Co.,LTD.
Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net
SS413F Optical Fiber Fusion Splicer User’s Manual
V
3.6.3 Electrode
For the operations and requirements of the electrode, please refer to "5.
Inspection and maintenance" of this manual.
3.6.4 Dust Check
For the operations and requirements of the dust checking, please refer to "5.
Inspection and maintenance" of this manual.
3.6.5 Manufacture adjust 1
Manufacture adjust 1 belongs to the operation with permission under certain
conditions. A.In the precondition the user can not splice the fiber at site and the
splicer is unable to be sent back to the factory. B.In the situation the operator does
not understand the daily maintenance of the machine. Under the precondition while
the operation is not correct, but has not caused a hard fault of the parts,
"Manufacture adjust 1" can be done under the guidance of the serviceman from the
customer service center.