SKYSHL SS413F Series - Edit; Select;Restore

40
Shenzhen Skyshl Technology Co.,LTD.
Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net
SS413F Optical Fiber Fusion Splicer User’s Manual
V
Time of arc 2
(Factory
etting)
Setting the time of arc 2.
3.2.2 Edit / select /restore
<1> Editing splice parameter files
On the readiness window as shown in the figure below, move the cursor on
[Splice Mode] and click button and come to the window of [select splice
parameter files], where "☆" No. 1 is the "splice parameter files" of current default
splice.
If the operator wants to add "tension test" function in the current fiber splicing
point. The operator shall modify the default splice parameters. The steps of "Edit"
splice parameter file are as follows:
A.On the window of [select splice parameters file], select " ☆ " no. 1 and click
button and "Edit, Restore, Export" option window appears. Move the
cursor to "Edit" and click button. "edit splice parameter files" window of
current default splice appears.