Shenzhen Skyshl Technology Co.,LTD.
Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net
SS413F Optical Fiber Fusion Splicer User’s Manual
V
C.Press button to return to the standby window. The standard factory
welding parameters are performed on the splicer, meeting the requirement of the
user for splicing the different kinds of optical fibers.
3.3 [Heater mode] operation
3.3.1 Overview
A．[heater mode] has 40 built-in users heater modes (heating parameter files) for
different types of fiber heat-shrink sleeve to be used by the users. There are nine
default heater modes according to the length, diameter, material and other
specifications of the fiber heat shrink sleeves, including: Standard, Micro 250,
Micro 400 and Micro 900 and so on. Each set of heating parameter files include
the options, important parameters and so on in process of fiber heat-shrink
sleeve heating.
B.[Heater mode] has also 11 built-in factory modes (library), i.e. 11 sets of heating
parameter files for the special use by the users (The heating parameter files in
the factory mode "Library" shall be introduced into 40 groups of users heater
modes).
To Next Page
Loading...