SKYSHL SS413F Series - Select Splice Mode According to the Type of Optical Fibers

85
Shenzhen Skyshl Technology Co.,LTD.
Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net
SS413F Optical Fiber Fusion Splicer User’s Manual
V
B.Preheat splicing
After the real-time revise data is restored to the factory setting, the operator must
conduct preheat splicing.After preheat splicing, the splicer automatically adapts
to environment and oxidation of the arc electrodes. Use SM optical fiber and
select "Calibrate - SM" as the present splicing mode. Repeat 1 to 3 times of
preheat splicing. After the completion of preheat splicing, the operator can select
any kind of splicing mode required to splice the corresponding optical fiber.
4.2 Select splice mode according to the type of optical fibers
<1> Different fibers have different splice parameters. In the fiber splice operation,
depending on the type of fibers to be welded, the user shall choose a suitable
fiber