SKYSHL SS413F Series - Edit; Select

46
Shenzhen Skyshl Technology Co.,LTD.
Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net
SS413F Optical Fiber Fusion Splicer User’s Manual
V
Heating end
temperature
Setting the heating end temperature. When the heater is
near this temperature, the buzzer alarms. At this moment,
the heater has been cooled and can be removed from the
furnace.
3.3.2 Edit / Select
<1> Editing heating parameter files
In the readiness window as shown in following figure, move the cursor to
[heater mode] window and click button, Come to the window of [select
heating parameters files], where " ☆ " no. 1 is the current default "heating
parameter files".
The operator can adjust the heating parameters and options according to the
demand. If the operator wants to add "Heat time" function due to the special needs
of heat shrink sleeve, the operator shall modify the machine default heating
parameter value. The steps of "edit" heating parameter document are as follows:
 In the window of [select heating parameter files], select "
☆
" no.1 and press
button. "Edit, Export" option window appears. When the cursor moves to
“edit” and click button, the current default "editing heating parameter files"
appears