Shenzhen Skyshl Technology Co.,LTD.
Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net
SS413F Optical Fiber Fusion Splicer User’s Manual
V
● Top right corner of the screen : Indicating the present power supply mode of
"power adapter".
● Top right corner of the screen : Indicating "Heater" is "warming up" at current.
● Bottom of screen : Indicating "Keypad operation" on
current screen.
LCD display
SS143F series of fusion splicers are equipped with a liquid crystal display. It is a
precision device manufactured in factory environment with quality controlled strictly.
Nevertheless, there may be also some individual black, red, blue, green dots on the
screen. The brightness of the display will be different at different viewing angle to the
screen. These symptoms are not the defects of LCD display, but natural
phenomenon.
2. Basic operation
2.1 Power supply of fusion splicer
The power supply modes of SS413F optical fiber fusion splicer are divided into
"external power adapter" or “removable lithium battery". Built-in high-performance
battery panels can be charged online continuously in the work in lithium battery
power mode to get a longer battery life. To correctly and safely use this type of fiber
splicer, the operator shall use the built-in high-performance battery and parts (power
adapter and lithium battery)provided by our companyand read carefully the operation
description in detail.
To Next Page
Loading...