Shenzhen Skyshl Technology Co.,LTD.
Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net
SS413F Optical Fiber Fusion Splicer User’s Manual
V
3.4 [Calibration] operation
<1> The temperature, barometric pressure and humidity in the operating
environment are always changed. The fusion splicers are equipped with
temperature and barometric sensors. The amount of change in the external
environment can be transmitted in real time to the control system, thus ensuring the
arc intensity of the machine is always in a state of balance, in which, electrode
wear itself, fiber debris bonding may cause the change of arc intensity. Left or right
offset and other abnormal circumstances of the arc center can not be corrected by
the fusion splicer sensor only. So the operator shall adjust the arc to compensate
the arc intensity, offset of the fiber splicing position relative to the arc center.
<2> Starting up is locked in “Calibrate”window of the primary menu and can not
be operated.
● In "Auto" and "Calibrate" splicing modes of SS413F optical fiber splicer,in
the full scope of the work environment (including the combination of extreme
working conditions), the splicer has the functions of work environment self
adaptive, electrode oxidation self adaptive, real time splice arc control
and calibration function.
As "arc calibration" function of SS413F fusion splicer is stopped at
the factory,
"Arc calibration" is locked and
can not be operated.
To Next Page
Loading...