SKYSHL SS413F Series - Selecting; Editing Splice Mode

87
Shenzhen Skyshl Technology Co.,LTD.
Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net
SS413F Optical Fiber Fusion Splicer User’s Manual
V
Description of some modes:
Splicing
mode
Explanation
Auto
In the process of splicing, the splice arc intensity is adjusted
and controlled automatically (only for the splice mode
selected).
Calibrate
In the process of splicing, the splice arc intensity is adjusted
and controlled automatically. The splice arc intensity is
calibrated automatically.
“Calibrate-SM”:The arc intensity calibrated is effective in all
modes; The arc intensity of all modes is calibrated.
“Calibrate-MM”:The arc intensity calibrated is local effective;
Calibrating the arc strength of this splicing mode and "Auto -
MM" mode.
“Calibrate-DS”:The arc intensity calibrated is local effective;
Calibrating the arc strength of this splicing mode and "Auto -
DS" mode.
“Calibrate-NZ”:The arc intensity calibrated is local effective;
Calibrating the arc strength of this splicing mode and "Auto -
NZ" mode.
Normal
Same type of fibers are spliced with the default factory
optimized parameters.
Special
Different types of fibers are spliced with the default factory
optimized parameters.
Other modes
In the splicer database, there are other splice modes different
to the modes listed above. The new splice modes are
constantly added. The users can contact their sales dealer and
ask for the latest splice modes.
4.3 Selecting / editing splice mode
<1> Factory default optical fibers and splicing modes of SS413F optical fiber
splicer (splice parameter file): No.1, Auto SM. If the user has not selected other
"splice parameter files",No. 1 is used by default as "splice parameter files" in the
current