SKYSHL SS413F Series - Calendar Setting; Heater; Battery; Environment

117
Shenzhen Skyshl Technology Co.,LTD.
Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net
SS413F Optical Fiber Fusion Splicer User’s Manual
V
Fiber and fiber debris are tiny and have sharp tip. If piercing into the finger and
getting into the eyes, they can cause injury. The operator shall be careful in
operation. Fiber debris shall be put into a dedicated waste site separated from
general waste.
<5> If the cutter is not used, put it into a box and keep the box in a dry, dust-free
place.
<6> If the machine fails or is abnormal, stop using it. Do not disassemble or
modify it. Contact the customer service center of the factory.
5.10 Calendar setting
This function is used to set the calendar and time inside the fusion splicer.
Operation steps: please refer to "3. 7. 1 time" of the manual.
5.11 Heater / battery / environment
This feature not only provides users with information about the current operating
environment, but also improves fusion splicing properties and provides software
correction values. Operation steps: please refer to "3.6.9 status" of the manual.