SKYSHL SS413F Series - Fusion Splicing Operation

119
Shenzhen Skyshl Technology Co.,LTD.
Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net
SS413F Optical Fiber Fusion Splicer User’s Manual
V
LED (power module indicator) blinks during charging.
 Temperature is too high (above 50 degrees) or the battery is exposed in direct
sunlight.
 Battery is faulty or has exceeded the service life. Insert a new battery. If LED
is still blinking, please contact the manufacturer or distributor.
 AC / DC adapter is not the model provided by our company.
6.2 Fusion splicing operation
Splice loss value is unstable / high.
 Clean V-groove, optical fiber clamp, mirror, objective lensinside the wind
cover. See [inspection and maintenance] (Chapter 5).
 Replace the electrode. See [Replacing electrode] (Section 5.5).
 If the fiber is bent, the bent portion of the optical fiber is placed upward.
 Splice loss is decided by the cleave angle, arc conditions and fiber cleaning.
 If finishing the operations above, splice loss is still too high or unstable,
contact the manufacturer or agent. It is recommended for regular maintenance
(once a year) to ensure good splicing quality.
Confirmingsplicing program
See [splice mode] operation (Section 3.2)
Display is suddenly closed.
 When the fusion splicer is powered by the battery,the operator shall turn on the
power-saving function.If the fusion splicer does not operate after a little time,
the display will shut down automatically. Press any button to return to a normal