SKYSHL SS413F Series - Storage of Spliced Fiber

95
Shenzhen Skyshl Technology Co.,LTD.
Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net
SS413F Optical Fiber Fusion Splicer User’s Manual
V
●
For the specific steps of tension test "On", please refer to "3.2.2 edit/ select" of
the manual.
4.6 Storage of spliced fiber
4.6.1 Upon the fiber splicing is completed and the loss estimate is displayed, the
splice loss value, splice parameters, splicing time and other relevant information
will be automatically stored in the machine's memory.
4.6.2 When 10000 splice results have been stored, the 10001 result will overwrite
the first result.
4.7
● Factory default setting of splicing parameter "tension test" is
"Off".
● If "splicing failure" appears in the fiber splicing,tensile test is
not possible.