Shenzhen Skyshl Technology Co.,LTD.
Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net
SS413F Optical Fiber Fusion Splicer Userās Manual
V
<2>Battery short circuit is strictly prohibited.
In any case, do not short-circuit the positive and negative terminals of the
battery, otherwise, once the battery core protection circuit fails, there will be a
large current, causing the battery heating up, smoking, firing and other hazards.
<3>Never heat up or incinerate battery.
Heating or incinerating battery will cause melting of the core spacer, burning of
electrolyte, and the risk of fire or explosion.
<4>Avoid sunlight exposure or rain water
Sunlight exposure may cause the battery to generate high temperature and rain
water may cause battery short circuit and other fault and cause easily the fail of
the protection functions.
<5>No battery shall be submerged in water.
Battery packing is not waterproof. The battery submerged in water will make
the battery cells have abnormal chemical reaction, smoke, fire and other
hazards.
<6>The dedicated charger shall be used and the battery shall be properly charged.
Battery charging process is a special process of electric ions reactions. The
performance requirements of battery cell in charging are fully taken into
account in the design of the dedicated battery charger. The multiple protecting
functions can prevent the risk of heating up, burning and so on of the battery in
charging process. The battery shall be charged in accordance with the correct
way and charging for too long time could pose a safety risk.
<7>Do not contact directly with battery leak electrolyte.