Shenzhen Skyshl Technology Co.,LTD.
Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net
SS413F Optical Fiber Fusion Splicer Userās Manual
V
<4> At "Pause 1" status in the splicing process, 4 motors (feed, aligning) can be
adjusted manually (step by step) by pressing button, so that the gap between the
left fiber and right fiber can be (aligned) best. Press button,the machine
goes from "Pause 1" to "Pause 2" and suspended.
<5> At the "Pause 2" status in the splicing process, 4 motors (feed, aligning) can be
adjusted manually (step by step) by pressing buttons so that the left fiber and
right fiber can be aligned best (gap). Press button. The fibers can be
spliced by the arc of the fusion splicer.
<6> After splicing, the machine will automatically calculate "splice loss" and it is
displayed on the screen.
To Next Page
Loading...