Shenzhen Skyshl Technology Co.,LTD.
Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net
SS413F Optical Fiber Fusion Splicer Userās Manual
V
<1>The power adapter is connected to AC mains power. As shown in the figure
below, DC output power cable is connected to "DC IN" inlet at the right side of
the fusion splicer. The power adapter is charging the lithium battery, realizing
the lithium battery online charging function. The lithium battery "provides
power and is being charged".
<2>When the lithium battery is charged by the power adapter, the "red" indicator
at "DC IN" input at the right side of the splicer is on as shown in following
drawing, i.e. The lithium battery is charged by one time.
To Next Page
Loading...