Shenzhen Skyshl Technology Co.,LTD.
Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net
SS413F Optical Fiber Fusion Splicer User’s Manual
V
Same type of fibers are spliced with the default factory
optimized parameters.
Different types of fibers are spliced with the default
factory optimized parameters.
In the splicer database, there are other splice modes
different to the modes listed above. The new splice
modes are constantly increasing. The users can contact
their sales dealer and ask for the latest splice modes.
SS413F optical fiber splicer in "Auto" and "Calibrate" splice modes is adaptive in
work environment and electrode oxidation in all scopes of the work environment
(including the combination of extreme working conditions). The splice arc can be
real-time controlled and corrected. Therefore, "shrinkage arc correction" function
is stopped in the default factory setting. Under normal circumstances, the fiber can
be directly spliced. In the following cases, "preheat splicing" is required. After the
machine performance is up to the best state, the fiber is spliced then:
A.Environment changes, especially high altitude (atmospheric pressure)
changes.
B. Replacement of electrode.
C. Normal or Special mode.
D.Not used for a long-term.
"Preheat splicing”: Select "Calibrate - SM" splicing mode; SM fiber splicing is
repeated for 1 to 3 times.
To Next Page
Loading...