Shenzhen Skyshl Technology Co.,LTD.
Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net
automatically these overrun error messages in the
process of splicing and suspend splicing operation, so
that the operator can make again a good fiber end face
and ensure splicing quality.
2.If it is set to "On", the overrun error messages will be
ignored in the process of slicing, allowing to cut
defective fiber and continue splicing process. The
quality cannot be guaranteed.
If it is set to "On", arc intensity will be adjusted to
compensate for changes in pressure and temperature.
To Next Page
Loading...