Shenzhen Skyshl Technology Co.,LTD.
Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net
SS413F Optical Fiber Fusion Splicer User’s Manual
V
be same, otherwise, wrong revise will occur. If more seriously, the splicing will
not be conducted. After the error occurs, under the condition the splicing is
possible, the operator can select correct fiber for "preheat splicing" to correct
mistakes. If splicing is not possible, the following methods shall be used for
correcting mistakes:
①.Restore the factory setting.
As shown in following figure, move the cursor to "maintenance" window and
select “Clear real-time revise” column. Press “Confirm" button. The real-time
revise data is restored to the factory setting.
②.Preheat splicing (see section 4.1.1 of this manual)
After the real-time revise datais restored to the factory setting,the preheat splicing
To Next Page
Loading...