Shenzhen Skyshl Technology Co.,LTD.
Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net
SS413F Optical Fiber Fusion Splicer Userās Manual
V
B. Press button to return back to the readiness window. The normal splicing
operation can be done. When the operator does not operate the keypad of the
fusion splicer after * * minutes, the machine will automatically enter automatic
shutdown status.
Parameter Description Table
When the user sets the sleep waiting time, if the fusion
splicer does not operate within the set time, the fusion
splicer will automatically turn off the display, the power
consumption of the fusion splicer will be greatly reduced to
prevent the big loss of the battery power. When the display
is off, LED indicator next to button is still green, the
operator can press any button to wake up the machine, and
resume the operation.
After this feature is turned on and set automatic
shutdown waiting time, if the fusion splicer does not
operate within the setting time, the fusion splicer will
automatically cut off the power supply.
3.7.6Menu Lock
In order to prevent incorrect operation of the machine, not cause the changes of the
parameters of the machine, not affect splicing quality, to preserve the historic
To Next Page
Loading...