Shenzhen Skyshl Technology Co.,LTD.
Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net
SS413F Optical Fiber Fusion Splicer Userās Manual
V
process is paused automatically. To ensure the quality of splicing, the user is
recommended to rework a good fiber end face and place the fiber once again.
Screen Data Description:
Fiber:Angle between the left fiber (extension line) and the right fiber (extension
line) on X (Y) screen. H: Angle between the left (right) fiber and the horizontal
line. V: Angle between the left (right) fiber end face and the vertical line.
<2> When there is no overrun alarm message display on the fusion splicer, the
operator should also check manually the fiber end face. If the operator finds a
situation similar to the following, he shall take the fiber away from the fusion
splicer, and then prepare again the fiber, because the fiber surface defects may
lead to a failure of the splicing.
To Next Page
Loading...