9. Turn the locking mechanism of a platform to the vertical
position so that the platform can be opened. Use a box
wrench (width across flats: 22mm).
10. Have at least two people pull the service platform forwards
and down. Use the handles on the service platforms.
11. After opening the protective roof, tighten the retainer on the
roof and the container.
12. Repeat steps 5 to 11 for the service platform and the protection roof of the MV transformer compartment.
4 Transport and Mounting
SMA Solar Technology AG
System ManualMVPS22JP-SH-en-1148
To Next Page
Loading...
