SMA Solar Technology AG Commissioning
Technical Description SWebBox-TEN101232 21
If you use a different operating system, refer to the manual of your operating system to find out how
to set the computer IP address to 192.168.0.100 and the subnet mask to 255.255.255.0.
6.4.2 Windows 7, Windows Vista
1. Start the computer.
2. In Windows select "Start"
3. Enter "ncpa.cpl" in the search field and press enter.
☑The "Network connections" window opens.
4. Double click on the LAN connection via which the Sunny WebBox is connected.
– If Windows displays several LAN connections, there are probably several network
connections installed in the computer. Ensure that you select the correct network connection,
with which the computer is connected to the Sunny WebBox. If necessary, refer to the
manual for your computer.
– In the event that no LAN connection is displayed, please refer to section
14”Troubleshooting” (page76).
5. Select [Properties].
☑The "Local Area Connection Properties" window
opens.
6. Note down the existing network settings so that you
can restore the settings in your computer after starting
up the Sunny WebBox.
7. Mark "Internet protocol version 4 (TCP/IPv4)" and
select [Properties].
☑The "Internet Protocol (TCP/IP) Properties"
window opens.
User rights in the operating system
You will need the appropriate user rights in order to change your computer's network
settings. Without the necessary user rights, you will not be able to start up the Sunny
WebBox. If you have any questions, consult your system administrator.
To Next Page
Loading...
Need help?
General
