Operation SMA Solar Technology AG
46 SWebBox-TEN101232 Technical Description
5. Change the value of the respective parameter via the "Value" field.
6. In order to adopt this value for all devices of the same type with the same firmware version,
check the "save for all devices of this device type" box. For Sunny SensorBox devices, the units
for ambient temperature, module temperature and wind speed must also coincide.
7. Select [Save].
☑ The Sunny WebBox adjusts the required value on the device(s). Once the value has been
changed, the Sunny WebBox displays "### Parameter change finished ###".
8. Select [OK].
☑ The user interface depicts the page with the parameter list.
To change additional parameters, proceed the same way. Repeat the instructions beginning from
step3 in order to set the parameters for further devices.
8.4 Event Report Display
The event report keeps a log of various Sunny WebBox events. For example, this is where the Sunny
WebBox stores information on file uploads to Sunny Portal.
Select "WebBox > Events" in the user interface. The user interface can display the last 500 entries of
the event report.
To Next Page
Loading...
Need help?
General
