SMA Solar Technology AG Decommissioning
Technical Description SWebBox-TEN101232 75
13 Decommissioning
13.1 Disassembling the Sunny WebBox
1. Stop the Sunny WebBox as described in section 11.2”Stopping the Sunny WebBox”
(page70).
2. Disconnect the DC plug connector of the plug-in power supply from the Sunny WebBox.
3. If the Sunny WebBox is connected to the telephone network via a modem connection,
disconnect the telephone cable from the Sunny WebBox.
4. If the Sunny WebBox is connected directly to a computer or a local network via the Ethernet
connection, disconnect the Ethernet cable from the Sunny WebBox.
5. Disconnect the RS485 plug connector from the Sunny WebBox.
6. If the Sunny WebBox is mounted on a top hat rail, remove the Sunny WebBox enclosure from
the top hat rail: Push the enclosure upwards slightly and remove the Sunny WebBox from the
top-hat rail.
7. If the Sunny WebBox is mounted directly to a wall, push the Sunny WebBox upwards slightly
and remove the Sunny WebBox from the top hat rail.
☑ The Sunny WebBox has been removed.
13.2 Packaging the Sunny WebBox
When returning the device to us, use packaging which adequately protects the device from damage
during transport (if possible, the original packing).
13.3 Disposing of the Sunny WebBox
Dispose of the Sunny WebBox at the end of its service life in accordance with the disposal regulations
for electronic scrap which apply at the installation site at that time. Alternatively, send it back to SMA
with shipping paid by sender, and labeled "FOR DISPOSAL".
DANGER!
Risk of lethal electric shock when opening the inverter.
• All work on the inverter may be carried out by qualified personnel only.
• Disconnect the inverter on the AC and DC sides as described in the inverter manual.
To Next Page
Loading...
Need help?
General
