- 47 -
(2) Example of Allocation of a Maximum of 7 Points in current Source (PNP) Interface
① Changing pins CN1-3 from Automatic/manual selection (MD0) to point table no./program no. selection 3 (DI2):
② Changing pins CN1-7 from Reverse rotation start (ST2) to point table no./program no. selection 2 (DI1):
① Change PD04 from 2003 to 2E03.
② Change PD12 from 0808 to 2D08.
Note) In the source (PNP) interface can not be assigned the wiring and the input signal to CN1-23 pin and
CN1-25 pin.
To Next Page
Loading...