SMC Networks LECSA Series - Under the Setting Tab: Setting of the Items to Display the Graph

- 70 -
5.11.1 Under the setting Tab: Setting of the items to display the graph
Set the items to display analogue and digital waveform, trigger conditions and time for the Horizontal axis of the graph.
Click the “Setting” tab of the “Setting” window to set the items to display the waveform, trigger conditions and horizontal
axis of the graph.
3 types analogue waveforms (analogue 1 to 3) and 4 types of digital waveforms (digital 1 to 4) can be set.
(1) Time
Set the Horizontal axis (Time axis) of the graph.
For LECSA, set “Measurement time” to the horizontal axis (Time axis).
① Click “ “ of “Measurement time” to set the Measurement time.
The unit ms of “Measurement time” is 1000ms＝1s.
①