SMC Networks LECSA Series - Saving;Loading Parameters; Saving Parameters

- 63 -
5.8 Saving/Loading Parameters
5.8.1 Saving Parameters
① From the “Parameter Setting” window in the setup software, select “Save As”.
② Please specify location to be saved.
③ Please enter any file name.
④ Click “Save”.
Files Saved
.prm2
Settings files for parameters PA, PB, PC, PD and PE
* Note Always upload current parameters from the driver to the software before saving.
(See“LECSA Operation Manual (Simplified Edition)”,section 5.3.2 for uploading.)
①
②
③
④