Using the Setup Wizard
4-9
4
The following cautionary message will appear each time you save your settings.
Figure 4-10. Setup Wizard - WAN 3G PIN Code Warning
An unauthenticated connection will display the message “Not dial yet” beneath the
PIN code, as shown in the following example.
Figure 4-11. Setup Wizard - WAN 3G Unauthenticated
• Pin Code Protect: Enables the use of a PIN code (personal identification number)
to encrypt access to the wireless 3G connection. Some service providers do not
require PIN code authentication. If a PIN code is not required for your 3G/3.5G
modem, disable this function. (Default: Enabled) Specifies a PIN code number that
corresponds with that set on your 3G/3.5G USB modem and displays the status of
the 3G connection.
- Not dial yet: Indicates that the 3G is not dialed and PIN is not authenticated yet.
- Authenticated successfully: Indicates that the 3G connection has
authenticated successfully.
To Next Page
Loading...
Need help?
General
