Snom HD100 - Page 100

SIP Phone Configuration Guide
- 100 -
Setting:
audio.x.adaptive_jitter.min_delay
Description:
When in adaptive jitter buffer mode, set the minimum delay (in ms) desirable to maintain
data packet capture and audio quality.
Values:
20-250
Default:
60
Setting:
audio.x.adaptive_jitter.target_delay
Description:
When in adaptive jitter buffer mode, set the target delay (in ms) desirable to provide good
audio quality with the minimal possible delay.
Values:
20-500
Default:
80
Setting:
audio.x.adaptive_jitter.max_delay
Description:
When in adaptive jitter buffer mode, set the maximum delay (in ms) desirable to maintain
data packet capture and audio quality.
Values:
180-500
Default:
240
Setting:
audio.x.rtp.port_start
Description:
Sets the Local RTP port range start.
Values:
1-65535
Default:
18000
Setting:
audio.x.rtp.port_end
Description:
Sets the Local RTP port range end.
Values:
1-65535
Default:
19000
Setting:
audio.rtcp_xr.enable
Description:
Enables or disables reporting of RTCP XR via SIP to a collector server. RTP Control
Protocol Extended Reports (RTCP XR) are used for voice quality assessment and
diagnostics.
Values:
0 (disabled), 1 (enabled)
Default:
0