Snom HD100 - Resynchronization

SIP Phone Configuration Guide
- 46 -
3.4.4.4 Resynchronization
On the Resynchronization page, you can select how and when the phone checks for updated firmware
and/or configuration files.
Setting
Description
Mode
Sets which files for which the HD10X checks. It can check for configuration
files, firmware update files (from the URL entered on the Firmware Server
Settings page), or both.
 Note
• Ensure that DHCP is also enabled on the Basic Network Settings page:
When checking for both configuration and firmware files, the firmware URL
can be within the config file. This firmware URL precedence over the URL
on the Firmware Server Settings page. It will also update the URL on the
Firmware Server Settings page. This allows you to change the firmware
URL automatically.
Bootup Check
Sets the HD10X to check the provisioning URL for new configuration and/ or
firmware files upon bootup. The update is applied as part of the reboot
process.