Snom HD100 - Handset Settings (Hs_Settings Module); Network Settings (Network Module)

SIP Phone Configuration Guide
- 76 -
Setting:
sip_account.x.mwi_uri
Description:
Sets the MWI URI that will be used for MWI subscription. If this setting is left blank, the
HD10X uses the account 1 user ID for MWI subscription.
Values:
SIP URI text string
Default:
Blank
6.6.2 Handset Settings ("hs_settings" Module)
The Handset Settings allow you to configure account assignments and names for the cordless
handsets that are registered to the base station. For more information on registering cordless
handsets, see HD101 User Guide.
General configuration file settings
Setting:
hs_settings.rf_power
Description:
Sets the DECT RF Power: 0 (low), 1 (high)
Values:
0,1
Default:
0
Setting:
hs_settings.x.handset_name
Description:
Sets the name for handset x. You can use up to 11 letters and/or numbers. Use
alphanumeric characters only-no symbol characters are allowed.
Values:
Text string
Default:
HANDSET
Setting:
hs_settings.x.default_account
Description:
Only one account is allowed. For future use.
Values:
1
Default:
1
Setting:
hs_settings.x.assigned_account
Description:
Only one account is allowed. For future use.
Values:
1
Default:
1
6.6.3 Network Settings ("network" Module)
The network settings follow the format: network.[element].
General configuration file settings
Setting:
network.vlan.wan.enable