Snom HD100 - Web Settings (Web Module); Trusted IP Settings (Trusted_Ip Module)

SIP Phone Configuration Guide
- 95 -
6.6.7 Web Settings ("web" Module)
The web settings control the web server IP, port, and security settings.
The web settings follow the format: web.[element].
All the web settings are included in the general configuration file.
Setting:
web.server_enable
Description:
Enables or disables the availability of the phone’s embedded Web Portal.
Values:
0 (disabled), 1 (enabled)
Default:
1
Setting:
web.http_port
Description:
Sets the http port when http is enabled.
Values:
1-65535
Default:
80
Setting:
web.https_enable
Description:
Sets server to use the https protocol.
Values:
0 (disabled), 1 (enabled)
Default:
0
Setting:
web.https_port
Description:
Sets the https port when https is enabled.
Values:
1-65535
Default:
443
6.6.8 Trusted IP Settings (“trusted_ip” Module)
The trusted_ip settings provide enhanced security for the HD10X. When enabled, these settings can
filter network traffic and reject any traffic from unauthorized sources.
The trusted_ip settings follow the format: trusted_ip.[element].
All the trusted_ip settings are included in the general configuration file.
Setting:
trusted_ip.only_accept_allowed_ip
Description:
Enables or disables using the Allowed IP list to filter network traffic. When enabled, all
unsolicited IP traffic will be blocked unless it is from one of the trusted IP addresses on
the "Allowed IP" list.
Values:
0 (disabled), 1 (enabled)
Default:
0