SIP Phone Configuration Guide
- 36 -
3.3.2.1 VLAN
You can organize your network and optimize VoIP performance by creating a virtual LAN for phones and
related devices.
Click the link for each setting to see the matching configuration file parameter in Section 6.6.3 Network
Settings ("network" Module). Default values and ranges are listed there.
Enable if the phone is part of a VLAN on your network. Select to enable.
Enter the VLAN ID (vlan 5, for example).
Select the VLAN priority that matches the Quality of Service (QOS) settings that
you have set for that VLAN ID. Outbound SIP packets will be marked and sent
according to their priority. 7 is the highest priority.
Note
• To configure QOS settings for your router or switch is a subject outside
the scope of this document.
To Next Page
Loading...
