Snom HD100 - Programmable Feature Key Settings (Pfk Module); Audio Settings (Audio Module)

SIP Phone Configuration Guide
- 99 -
6.6.12 Programmable Feature Key Settings ("pfk" Module)
The programmable feature key (PFK) settings store the data associated with each programmable
feature key.
The programmable feature key settings follow the format: pfk.x.[element], where x is the programmable
feature key ID, ranging from 1 to 10, and 13-14. All the programmable feature key settings are included
in the general configuration file.
Setting:
pfk.x.quick_dial
Description:
Sets the quick dial string to use if quick dial is assigned to PFK x.
◼ x = 1-10 for speed dial keys 1-10 on telephone base
◼ x = 13 for Service key (HS SER.) on cordless handset
◼ x = 14 for Emergency key (HS EMER.) on cordless handset
Values:
Text string (SIP URI)
Default:
Blank
Setting:
pfk.x.account
Description:
Sets the SIP account used for the assigned feature (if applicable).
◼ x = 1-10 for speed dial keys 1-10 on telephone base
◼ x = 13 for Service key (HS SER.) on cordless handset
◼ x = 14 for Emergency key (HS EMER.) on cordless handset
Values:
1
Default:
1
6.6.13 Audio Settings (“audio” Module)
The audio settings include jitter buffer parameters and RTP port settings.
All the audio settings are included in the general configuration file.
Setting:
audio.x.jitter_mode
Description:
Select the desired mode for the jitter buffer: fixed (static) or adaptive. This setting
depends on your network environment and conditions.
Values:
fixed, adaptive
Default:
adaptive
Setting:
audio.x.fixed_jitter.delay
Description:
When in fixed jitter buffer mode, set the delay (in ms) desirable to provide good audio
quality with the minimal possible delay.
Values:
30-500
Default:
70