Snom HD100 - Provisioning Server; Plug-And-Play Settings; DHCP Settings

SIP Phone Configuration Guide
- 45 -
3.4.4.1 Provisioning Server
Setting
Description
Server URL
URL of the provisioning file(s). The format of the URL must be RFC 1738
compliant, as follows: "<schema>://<user>:<password>@
<host>:<port>/<url-path>"
"<user>:<password>@" may be empty.
"<port>" can be omitted if you do not need to specify the port number.
Server Authentication
Name
User name for access to the provisioning server
Server Authentication
Password
Password for access to the provisioning server
3.4.4.2 Plug-and-Play Settings
Setting
Description
Enable PnP Subscribe
Select to enable the HD10X to search for the provisioning URL via a
SUBSCRIBE message to a multicast address (224.0.1.75). The HD10X
expects the server to reply with a NOTIFY that includes the provisioning
URL. The process times out after five attempts.
3.4.4.3 DHCP Settings
Setting
Description
Use DHCP Options
Enables the HD10X to use DHCP options to locate and retrieve the
configuration file. When selected, the HD10X automatically attempts to get a
provisioning server address, and then the configuration file. If DHCP options
do not locate a configuration file, then the server provisioning string is
checked.
 Note
• Ensure that DHCP is also enabled on the Basic Network Settings page.
DHCP Option Priority 1
If DHCP is enabled, Set the DHCP Option priority. Select the highest priority
option.
DHCP Option Priority 2
If DHCP is enabled, Set the DHCP Option priority. Select the second highest
priority option.
DHCP Option Priority 3
If DHCP is enabled, Set the DHCP Option priority. Select the third highest
priority option.
Vendor Class ID
(DHCP 60)
DHCP Option 60 is available to send vendor-specific information to the
DHCP Server.
User Class Info
(DHCP 77)
DHCP Option 77 is available to send vendor-specific information to the DHCP
Server.
English