Snom HD100 - Page 66

SIP Phone Configuration Guide
- 66 -
All these settings are exported when you manually export the configuration from the HD10X.
General configuration file settings
Setting:
sip_account.1.dial_plan
Description:
Sets the dial plan for account 1. See Section 3.2.1.2 Dial Plan.
Values:
Text string
Default:
x+P
Setting:
sip_account.1.call_restrict_dial_plan
Description:
Enter call restriction dial plan, to prevent users from completing calls to certain numbers
for this account.
Values:
text string (dial plan syntax)
Default:
Blank
Setting:
sip_account.1.inter_digit_timeout
Description:
Sets the inter-digit timeout (in seconds) for account 1. The inter-digit timeout sets how
long the HD10X waits after the last digit is entered before dialing the number.
Values:
1-10
Default:
3
Setting:
sip_account.1.dtmf_transport_method
Description:
Sets the transport method for DTMF signaling for account 1.
Values:
auto, rfc2833, inband, info
Default:
auto
Setting:
sip_account.1.unregister_after_reboot_enable
Description:
Enables or disables the HD10X to unregister account 1 after rebooting.
Values:
0 (disabled), 1 (enabled)
Default:
0
Setting:
sip_account.1.primary_sip_server_address
Description:
Sets the SIP server IP address for account 1.
Values:
Text string
Default:
Blank
Setting:
sip_account.x.primary_sip_server_port