Snom HD100 - Page 70

SIP Phone Configuration Guide
- 70 -
Setting:
sip_account.x.local_sip_port
Description:
Sets the Local SIP port for account 1.
Values:
1-65535
Default:
Account 1: 5060 Account 2: 5070
Account 3: 5080 Account 4: 5090
Setting:
sip_account.x.transport_mode
Description:
Sets the Signaling Transport Mode for account 1.
Values:
udp, tcp, tls
Default:
udp
Setting:
sip_account.x.mwi_enable
Description:
Enables or disables message waiting indicator subscription for account 1. Enable if
SUBSCRIBE and NOTIFY methods are used for MWI.
Values:
0 (disabled), 1 (enabled)
Default:
0
Setting:
sip_account.x.mwi_subscription_expires
Description:
Sets the MWI subscription expiry time (in seconds) for account 1.
Values:
15–65535
Default:
3600
Setting:
sip_account.x.mwi_ignore_unsolicited
Description:
Enables or disables ignoring of unsolicited MWI notifications - notifications in addition to,
or instead of, SUBSCRIBE and NOTIFY methods - for account 1. Disable if MWI service
is configured on the voicemail server and does not involve a subscription to a voicemail
server.
Values:
0 (disabled), 1 (enabled)
Default:
0
Setting:
sip_account.x.stutter_dial_tone_enable
Description:
Enables or disables MWI stutter dial tone for account 1.
Values:
0 (disabled), 1 (enabled)
Default:
1
Setting:
sip_account.x.nat_traversal_stun_enable