Snom HD100 - Page 73

SIP Phone Configuration Guide
- 73 -
Values:
10, 20, 30, 40, 50, 60
Default:
20
Setting:
sip_account.x.cid_src_priority.1
Description:
Sets the first priority of the caller ID source to be displayed on the incoming call screen.
Values:
from, pai, rpid
Default:
pai
Setting:
sip_account.x.cid_src_priority.2
Description:
Sets the second priority of the caller ID source to be displayed on the incoming call
screen.
Values:
none, from, pai, rpid
Default:
rpid
Setting:
sip_account.x.cid_src_priority.3
Description:
Sets the third priority of the caller ID source to be displayed on the incoming call screen.
Values:
none, from, pai, rpid
Default:
from
Setting:
sip_account.x.call_rejection_response_code
Description:
Select the response code for call rejection. This code applies to the following call
rejection cases:
• User rejects an incoming call
• DND is enabled
• Phone rejects a second incoming call with Call Waiting disabled
• Phone rejects an anonymous call with Anonymous Call Rejection enabled
• Phone rejects call when the maximum number of calls is reached
Values:
480, 486, 603
Default:
486
Setting:
sip_account.x.dtmf_payload_type
Description:
Set the configurable RTP payload type for in-call DTMF.
Values:
96-127
Default:
101
Setting:
sip_account.x.use_register_route_header
Description:
Use Route header for REGISTER