Snom HD100 - Page 79

SIP Phone Configuration Guide
- 79 -
Values:
Text string (IPv4)
Default:
Blank
Setting:
network.ip.dns2
Description:
Sets the secondary DNS server IP address.
Values:
Text string (IPv4)
Default:
Blank
Setting:
network.ip.manually_configure_dns
Description:
Enable or disable manual DNS configuration.
Values:
0 (disable), 1 (enable)
Default:
0
Setting:
network.ip.pppoe.service_name
Description:
If IPv4 mode is PPPoE, enter the name of the applicable PPPoE provider, in case more
than one is available.
Values:
Text string
Default:
Blank
Setting:
network.ip.pppoe.username
Description:
If IPv4 mode is PPPoE, enter your PPPoE account username.
Values:
Text string
Default:
Blank
Setting:
network.ip.pppoe.access_password
Description:
If IPv4 mode is PPPoE, enter your PPPoE account password.
Values:
Text string
Default:
Blank
Setting:
network.ip6.mode
Description:
Set the IPv6 network mode, depending on how the device will be assigned an IP
address.
Values:
disable, auto, static
Default:
disable
Setting:
network.ip6.static_ip_addr