SolarEdge SE3000US User Manual

Installing the Inverter
SolarEdge Installation Guide – MAN-01-00002-1.6
39
Figure 15: AC Terminal Blocks
8 Tighten the screws of each wire terminal according to the following torque.
The tightening moment is 1.2-1.5 Nm (0.88-1.1 pound-foot).
9 Verify that there are no strands in each terminal connector and that the
unused ports of the terminals are sealed.
A
B
C
D
E
Terminal
Connectors

SolarEdge SE3000US Specifications

General

Brand	SolarEdge
Model	SE3000US
Category	Inverter
Language	English