Sony HCD-HPX7 - LOD MOTOR

27
HCD-HPX7
3-28. LOD MOTOR
3-29. SLIDER (PUSH-POPUP)
2 sub chassis assy (L)
1 two screws
(BTTP M2.6
× 8)
3 three screws
(BTTP M2.6
× 8)
8 LOD motor
5 two screws
(BTTP M2.6
× 8)
7 LOD MOTOR board
4 belt (MOT-OP
)
6 Remove soldering from the two points
3 claw
4 Remove the slider (push-popup1)
in the direction of the arrow.
2 sub chassis assy (R)
slider (push-popup 1)
slider (push-popup 2)
1 two screws
(BTTP M2.6 × 8)