Sony UP-D898MD - Page 67

3-11 (E)
UP-D898MD/X898MD
8. To install, reverse the removal procedure.
n
. When assembling the LCD holder, push the parts in the direction of the arrow.
. Attach the tape to the position as shown in the illustration.
9. Perform the check (self-diagnosis). (Refer to Section 3-13.)
0 to 0.5 mm
Fold the tape and attach
to the KY-711 board.
0 to 0.5 mm
LCD holder
LCD panel
Conductive plate
for connection
Light guide plate (LCD)
assembly