2-7 (E)
UP-D898MD/X898MD
2-2-4. Printing cannot be performed normally from video signal (NTSC/PAL)
(UP-X898MD Only)
No
Yes
Yes
No
No
Yes
Printing cannot be performed
normally from video signal
(NTSC/PAL).
Is the printing performed normally
from PC?
Perform the flow chart of
Section 2-2-3.
Is the connection of the video
cable between this unit and
VIDEO signal output device
normal?
Check the connection of the video
cable. If the symptom persists,
replace the video cable.
Is there any noise mixed in the
printed image?
Replace the video cable with the
shorter one, or with the one having
less attenuation.
Replace the MA-195 board.
(Refer to Section 3-1.)
To Next Page
Loading...
