Start / Check battery status
Leonova is started with the ON/OFF key. The display
will shut down when not used within 10 minutes (de-
fault setting) and the Leonova goes to “sleep mode”.
By pressing the ON/OFF key the Leonova immedi-
ately will go to “sleep mode”. To leave sleep mode
and resume work in the last position, press the ON/
OFF key.
POWER OFF is automatic when not used within 30
minutes (default setting).
Times for “power off” and “sleep mode” can be
changed under MENU ‘Settings’ (see later in this
chapter).
A battery status icon is placed in the upper right
corner.
About Leonova
The file ‘About Leonova’ contains important infor-
mation on the software status.
The license number and serial number belongs to
the instrument. All upgrades concerning program
versions and functions are connected with it. The
package number is a running number of update
operations.
When ordering new functions, these are delivered
as a text file ‘Leonova.txt’. Each such order has a
running package number and is individual for the
instrument. The files can only be loaded in package
order, see ‘Leonova Service program’.
To open the ‘About Leonova’ file, press MENU, se-
lect ‘About Leonova’ (1) with UP/DOWN arrow keys
and press ENTER.
Press BACK or ENTER to close the ‘About’ window.
1
To Next Page
Loading...
