SPM leonova emerald - RPM Measurement

C:4 Measurement techniques always included
BC
RPM measurement
RPM, optical:
Distance 30 to 2000 mm.
Measuring angle 5 to 75°
Reflecting
tape
RPM, contact centre
Holditagainsttheshaftcentre
TAD-11 Short, 30 mm
TAD-15 Long, 60 mm
TAD-19 Extra long, 170 mm
Peripheral, contact wheels
Multiply the reading by the wheel factor:
TAD-12 0.1m/min.(factor10)
TAD-13 0.1yd./min.(factor10)
TAD-17 0.5ft./min. (factor 2)
TheSPMlasertachometer/IRtemperatureprobeTTP10isusedforbothopticalandcontactRPM
measurement. It is connected to the transducer input marked RPM on Leonova.
A blue LED indicator on the Tachometer and Temperature probe TTP10 lights when reflected ligth
hits the sensor.
TTP10
CAB90 Stroboscope cable, 1.5 m spiral,
3.5 mm phones connector
CAB92 Proximity switch cable, 1.5 m
spiral, M12 connector
CAB95 Keyphasor cable, 1.5 m spiral,
BNCconnector
5–75°
Inputfortachometer/tem-
perature probe TTP10