SPM leonova emerald - Measuring Point Images; Measuring Result Window

B:22 General measurement functions
B
In the upper part of the measuring result window (1), the current measuring assignment data is dis-
played. Saved measuring results from that measurement are displayed in the lower part of the display
(2). The scroll bar (3) indicates that there are more parameters than those visible on the screen.
The measuring results are shown in this window both before and after saving the current measurement.
When several readings have been taken and saved, the F1 (‘Previous result’) and F2 (‘Next result’)
keys can be used to toggle between them (4). Press the SHIFT key + F1 or F2 to skip to the first or
last measuring result.
The measuring result window also shows the units of measurement (5), if any.
Measuring result window
3
1 1
2
5
5
2
3
4 4
2
3
1
Using the Measuring Point Imag-
ing function in Condmaster, images
or photographs can be connected
to measuring points. If a measur-
ing point has an image associated
with it, the image can be viewed in
Leonova Emerald (1).
Images are accessed from the
measurement window. With the
measuring point name marked (2),
press the F4 key (‘View image’) (3).
Measuring point images