Vibration measurement E:7
Guide for machine classification
Machine condition evaluation according to the ISO
10816 standard requires a correct classification of
the monitored machine.
So far, ISO 10816 consists of six parts. Part 1
contains general guide lines.
Parts 2 to 6 describe 5 different machine types.
Most of these have sub divisions, each with its
own set of limit values defining acceptable and
unacceptable vibration levels.
Thelines‘Part’,‘Group’and‘Support’(1)contain
the data defining a specific set of limit values
in ISO 10816. Opening the line ‘Part’ leads to
a step-by-step guide that helps you to input all
necessary data.
‘Quickmode’(2)isusedtospeedupthemeasure-
ment. The measurement calculations will be based
on the FFT instead of the time signal, resulting in
faster settling time.
1
2
To Next Page
Loading...
