SPM leonova emerald - Measuring Modes

General measurement functions B:3
B
Leonova measurement functions
Leonova Emerald
®
always has the following measurement functions with unlimited use:
• HDm/HDc and/or SPM LR/HR
• RMS vibration measurement according to ISO 2372
• Speed measurement, rpm and peripheral
• Temperature measurement
• User defined (manual input)
• Stethoscope
• Vocal comments
• CondID, NFC measuring point identification
• Automatic recording of measuring results
The remaining measurement functions are user selected:
• Shock pulse measurement SPM HD, time and frequency domain
analysis
• Shock pulse measurement LR/HR with SPM Spectrum and
time signal
• Shock pulse measurement dBm/dBc and SPM Spectrum
• Vibration measurement according to ISO 10816, with spectrum
• Vibration Premium or Vibration Supreme for evaluated vibration
analysis
• HD Analysis
• Balancing, single plane
For each measurement, the user can input a comment as text or voice recording.
Measuring modes
Leonova is primarily designed as a data logger. Measuring rounds, complete with all input data for
evaluated measurements, are downloaded from a PC running the SPM software Condmaster
®
Ruby.
After measurement, the results are uploaded to the PC.
When data logging, the operator works along a predetermined route and measures ‘in measuring
round order’. As an alternative, CondID memory tags can be attached to the machines. A measuring
point, belonging to a downloaded measuring round, is identified by reading its tag. Leonova dis-
plays that point and its data, ready for measurement.
For unprepared measurement, Leonova contains a ‘default file’ for each measuring technique. When
required, the input data are entered manually by editing the default values. Edited default files can be
saved as new default files, or as user files which retain both the input data and the measuring results.