SPM leonova emerald - RPM Measurement; Vibration Severity Measurement

Measurement techniques always included C:3
C
Measurement techniques always included
Leonova is always programmed for an unlimited use of the measurement techniques listed below.
Other diagnostic and analytic functions, for shock pulse measurement, vibration measurement, and
rotor balancing, are user selected.
Temperature,
User defined
RPM
Vibration
Measurement techniques always included are:
• RPMmeasurement
• ShockpulsemeasurementHDm/HDcand/orLR/HR
• RMSvibration,ISO2372
• Temperaturemeasurement,Userdefined(manualinput)
• Stethoscope(availablefunctionunderSpeed,Shockpulse,Vibration,Temperature)
These measurement techniques and the equipment needed to use them are described in this chap-
terwiththeexceptionoftheSPMHDm/HDcandLR/HRtechniquedescribedinChapterD.
MeasuringpointscontainingthefreetechniquescanbedownloadedfromCondmasterRuby,fully
configured and ready for measurement.
When the default files under the technique windows are used, the analog measurements and the
vibration measurement normally require a configuration under ‘Measuring point data’.
Shock
pulse