E:10 Vibration measurement
Data for ISO 10816 part 4
Part 4 is limited to ‘Gas turbine driven sets
excluding aircraft derivates’. The standard
also states a power output of at least 3 MW.
For this part, input the RPM of the turbine.
This does not affect the vibration limit values
but the upper frequency limit of the measure-
ment, up to 5000 Hz for a turbine speed of
20000 RPM.
Data for ISO 10816 part 5
Part 5 is for ‘Machine sets in hydraulic power
generating and pumping plants’, divided into
4 groups. Please study the definitions and
drawings provided in the standard.
To Next Page
Loading...
