SPM leonova emerald - Communication with PC

A:22 General instrument functions
A
Leonova connects to the PC via the USB cable
CAB94. Leonova communicates with
• Leonova Service Program.
• Condmaster
®
Ruby
Place both programs into the same folder on your
PC.
To start communication, press SHIFT+F1 to open
the communication mode, or select ‘Communica-
tion’ (3) under the ‘File’ menu and press ENTER.
Connect the USB cable between instrument and
computer. Control the communication from the
computer. Press F4 (Close) to exit the communica-
tion mode.
On the PC, open ‘Data transfer’ or ‘Planning’ in
Condmaster.
Communication with the PC
1
Leonova service program
The Service Program is used to
• print and save balancing reports.
• load additional functions from the file
‘Leonova.txt’.
• check for updates of Leonova Service
Program. This function requires that
your computer is connected to the
Internet. Shows version info, available
and current versions.
• upgrade the Leonova
software from the file
‘LeonovaDiamondAndEmerald.swp’.
• transfer language files from file ‘*.llf’.
• upload and download Leonova files
to/from the PC (file extension .LRF).
• make and reload safety copies of the
Leonova files (file extension .lsc).